Wireless Remote Control Kit for M4 and M6 adapters/washers picture 3 shows how to

picture 3 shows how to directly connect the 60 inch hose to the pump output by removing the strain relief hose from the barb output

It is intended to demonstrate the universal kit

refer to the Battery Condition Based on Voltage Table below:

*****Use only the charger provided to prevent permanent damage******

two 12 mm bolt axles

Wireless Remote Control Kit for M4 and M6 adapters/washers picture 3 shows how toKit includes programmable eprom receiver, two channel transmitter ( unique codes), on off switch, 4 (6mm) copper crimp ferrules, 2 insulated ferrules. Receiver is pre programmed to both transmitter channels ( toggle mode). Receiver rated for 12 volts, 10 amps. Program is retained without batteries. Receiver can be reprogrammed to many unique transmitters. One transmitter can activate multiple receivers. Color coded wires provide easy installation. 20