3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Connection Type 3: 5/16-18 Screw

Connection Type 3: 5/16-18 Screw thread

4" x 48" Tri-Clamp Spool

User assumes all responsibility and risks of the system"

Compressor Seals will require re-build after 200-240hrs of operation

***Note: Tank comes empty and does not include solvent

3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Connection Type 3: 5/16-18 ScrewIncludes a Pair of Custom 3 8" 37 degree JIC fittings that adapt on to any TRS21 pump. (Does not include Pump) ***Note: This Adapter SHOULD NOT BE OVERTIGHTENED. Hand Tight with 1 4 Wrench turn will complete the face seal of the O ring. (PTFE Thread Tape is NOT Required for this connection) ***Note: Always use 2 Wrenches while tightening the hose to the flare to stop the gasket from being crushed.